你的位置：首頁 > 產品展示 > 光學儀器 > 激光調制 >Newport激光二極管控制器
產品詳細頁
Newport激光二極管控制器
- 產品型號：
- 更新時間：2023-12-20
- 產品介紹：Newport激光二極管控制器The unit’s DSP based temperature controller provides fast settling times and exceptional short and long-term temperature stability.
- 廠商性質：代理商
- 在線留言
產品介紹
| 品牌 | Newport/美國 | 價格區間 | 面議 |
|---|---|---|---|
| 組件類別 | 光學元件 | 應用領域 | 電子 |
Newport激光二極管控制器
1500 mA/10 V 二極管驅動器，32 W TEC 控制器
概覽
The Model 6100 Laser Diode and Temperature Controller provides up to 1500 mA drive currents at up to 10 V compliance in combination with a 32 W (4 A, 8 V) bipolar output thermoelectric cooler (TEC) controller for low noise, high performance laser diode control.
The 6100 is renowned for its outstanding design and quality. The unit’s DSP based temperature controller provides fast settling times and exceptional short and long-term temperature stability. This combined with the 6100’s ultra-stable current control make for a highly reliable laser diode test setup.
In addition to robust hardware, the 6100 is flexible, offering front panel control along with LabVIEW drivers and a user-friendly software suite for test setup and monitoring, high-speed data acquisition for LIV characterization, and TEC controller tuning. Laser diode control parameters, such as compliance voltage, set current, current limits, modulation, bandwidth, and photo diode feedback call all be set from either the front panel or via USB using Newport’s controller software or LabVIEW.
The 6100’s four-line alphanumeric and dual seven-segment LCD output is customizable and can display critical measurements such as laser diode current, photodiode current, forward voltage, TEC current, TEC voltage, and temperature sensor details simultaneously.
The TEC controller allows for easy programming of sensor calibration constants and is compatible with all standard temperature sensors, including thermistors, platinum RTD, AD590/592 and LM335 IC sensors.
Ask about our university and quantity order discounts.
Newport激光二極管控制器技術參數
激光器電流-1.5 A
激光器恒流輸出電壓-10 V
TE 電流范圍-4.00 to +4.00 A
TE 電壓范圍-8.00 to +8.00 V
TE 輸出功率32 W
溫度范圍-100 to 250°C
計算機接口-USB
端口類型-25-pin D-sub
電源要求-100/120/220/240 VAC, 50/60 Hz universal input
激光器電流精度±0.05% of FS
外部調制（高帶寬）500 / 1400 kHz
外部調制（低帶寬）15 kHz
激光器輸出噪聲/紋波（低帶寬）<25 µA
激光器輸出噪聲/紋波（高帶寬）<20 µA / <50 µA
TEC 限制電流精度±0.03%
TEC 電流 24 小時穩定性±0.002°C
TEC 電流 1 小時穩定性±0.001°C
TEC 波紋/噪聲 (rms)<0.5 mA
監測電流精度±1% of FS
監測電流范圍0 to 500 mA / 0 to 1500 mA
光電二極管電流范圍0 to 5 mA
光電二極管反向偏壓Adjustable, 0 to 5 V
兼容探頭Thermistors, Platinum RTD, AD590 and LM335 IC
工作溫度0 to 40°C
工作濕度<90% relative humidity non-condensing
